Tug Brian A. McAllister Model
Bob's Place
Home Page    Fairways Pix    Lakewood Pix    S.I. Pix    Maintenance   Models
      Tug Pix  Tankers   Links    FAQ's    Fun Things  Small Boat Graphics
Page 2    Page 3
BrianDD BrianIce63

The Brian was my first full time licensed engineer's job
Fitting_nozzle_1w Nozzle_3w
I made the Kort Nozzle from a PVC fitting
Nozzle_4 NewStrut_2w
Added Rudder Shoes Brazed strut and bearing from copper tubing
Nozzle_a_15w Nozzle_ExtensionW
Nozzle, strut and tailshaft Nozzle extension and transition piece
FrameCutouts_2w FrameCutouts_3
Print outs glued to plywood sheet First cut
FrameCutouts_4 FrameCutouts_5
Close cut Cutting on band saw
DrillSternTube_2w Hull_1w
Drilling for stern tube Keel and Frames
Hull_3w Hull_5w
With rib First planks
Hull_6w
Gluing planks		 Hull_8w

Forward hull 3/4 planked
Hull_10w
Forward hull 3/4 planked from top		 Hull_13w
Planking stern
Hull_15w
More or less done		 Hull_16w
Ditto from top
Hull_18aw
Ready to fiberglass		 Hull_19aw
fiber glassed
Rudders_1w
Rudder layout		 Rudders_2w
Rudders cut out
Rudders_4w
Rudders and shafts		 SteeringFlat_w
Rudder Flat
SternTube_aW
Stern tube parts		 SternTube_bW
Stern tube assembled
SternTube_cW
Stern tube temporarily in place		 DeckCutout_1w
Deck ready for cut out
Deck_2w
First fitting of deck		 Deck_3w

Ditto
Nozzle_Rudders_w
Nozzle with rudders		 Deck_4_w
Deck with curb
EpoxyNozzle_w
Kort Nozzle epoxied to hull		 Parts_Hull_w
Coated Parts
RubRails_w
Rub Rails		 Rudders_6_w
Rudders Primed
Deck_Nozzle_w
Nozzle and Deck		 Deck_CurbW
Set Deck Temp.
Hull_20w
Hull in Red		 Deck_House_bend_w
Bending deck house sides
Page 2    Page 3
Back to Tug Models Page